• Albanian: çelik
• Arabic:
• Bosnian: čelik
• Breton: dir
• Catalan: acer
• Chinese: 鋼, 钢 (gāng)
• Croatian: čelik
• Czech: ocel
• Danish: stål g Danish
• Dutch: staal
• Esperanto: ŝtalo
• Finnish: teräs
• French: acier
• German: Stahl
• Greek: χάλυβας (xálivas) , ατσάλι (atsáli) (from Medieval Venetian "azzal")
• Hebrew: פלדה
• Hindi: इस्पात (ispāt) , फ़ूलाद (fūlād)
• Hungarian: acél
• Icelandic: stál
• Italian: acciaio
• Japanese: 鋼鉄 (こうてつ, kōtetsu)
• Korean: 강철 (gangcheol)
• Latvian: tērauds
• Lithuanian: plienas g Lithuanian
• Maori: tīra
• Norwegian: stål
• Persian: فولاد
• Polish: stal
• Portuguese: aço
• Romanian: oţel
• Russian: сталь (stal’)
• Serbian:

  Cyrillic: челик

  Roman: čelik

• Slovak: oceľ
• Spanish: acero
• Swedish: stål
• Telugu: ఉక్కు (ukku)
• Turkish: çelik
• Urdu: اسپات, فولاد
• Welsh: dur

• Czech: ocílka

Related terms

• steel oneself
• steelware
• steely
• stainless steel

Adjective

steel

1. made of steel

Translations

Dutch

Pronunciation

• /stel/

Noun

steel (Plural: stelen, diminutive: steeltje)

1. handle (of a broom, a pan)

Verb

steel

1. First person singular present tense of stelen
2. Singular imperative of stelen

Steel is an alloy consisting mostly of iron, with a carbon content between 0.2 and 2.04% by weight (C:1000–10,8.67Fe), depending on grade. Carbon is the most cost-effective alloying material for iron, but various other alloying elements are used such as manganese, chromium, vanadium, and tungsten. Carbon and other elements act as a hardening agent, preventing dislocations in the iron atom crystal lattice from sliding past one another. Varying the amount of alloying elements and form of their presence in the steel (solute elements, precipitated phase) controls qualities such as the hardness, ductility and tensile strength of the resulting steel. Steel with increased carbon content can be made harder and stronger than iron, but is also more brittle. The maximum solubility of carbon in iron (in austenite region) is 2.14% by weight, occurring at 1149 °C; higher concentrations of carbon or lower temperatures will produce cementite. Alloys with higher carbon content than this are known as cast iron because of their lower melting point and castability. Iron can be found in the crust only in combination with oxygen or sulfur. Typical iron-containing minerals include Fe2O3—the form of iron oxide found as the mineral hematite, and FeS2—pyrite (fool's gold). Iron is extracted from ore by removing the oxygen by combining it with a preferred chemical partner such as carbon. This process, known as smelting, was first applied to metals with lower melting points. Copper melts at just over 1000 °C, while tin melts around 250 °C. Cast iron—iron alloyed with greater than 1.7% carbon—melts at around 1370 °C. All of these temperatures could be reached with ancient methods that have been used for at least 6000 years (since the Bronze Age). Since the oxidation rate itself increases rapidly beyond 800 °C, it is important that smelting take place in a low-oxygen environment. Unlike copper and tin, liquid iron dissolves carbon quite readily, so that smelting results in an alloy containing too much carbon to be called steel.

Even in the narrow range of concentrations that make up steel, mixtures of carbon and iron can form into a number of different structures, with very different properties; understanding these is essential to making quality steel. At room temperature, the most stable form of iron is the body-centered cubic (BCC) structure ferrite or α-iron, a fairly soft metallic material that can dissolve only a small concentration of carbon (no more than 0.021 wt% at 910 °C). Above 910 °C ferrite undergoes a phase transition from body-centered cubic to a face-centered cubic (FCC) structure, called austenite or γ-iron, which is similarly soft and metallic but can dissolve considerably more carbon (as much as 2.03 wt% carbon at 1154 °C). As carbon-rich austenite cools, the mixture attempts to revert to the ferrite phase, resulting in an excess of carbon. One way for carbon to leave the austenite is for cementite to precipitate out of the mix, leaving behind iron that is pure enough to take the form of ferrite, resulting in a cementite-ferrite mixture. Cementite is a stoichiometric phase with the chemical formula of Fe3C. Cementite forms in regions of higher carbon content while other areas revert to ferrite around it. Self-reinforcing patterns often emerge during this process, leading to a patterned layering known as pearlite (Fe3C:6.33Fe) due to its pearl-like appearance, or the similar but less beautiful bainite.

Perhaps the most important polymorphic form is martensite, a chemically metastable substance with about four to five times the strength of ferrite. A minimum of 0.4 wt% of carbon (C:50Fe) is needed to form martensite. When austenite is quenched to form martensite, the carbon is "frozen" in place when the cell structure changes from FCC to BCC. The carbon atoms are much too large to fit in the interstitial vacancies and thus distort the cell structure into a body-centered tetragonal (BCT) structure. Martensite and austenite have an identical chemical composition. As such, it requires extremely little thermal activation energy to form.

The heat treatment process for most steels involves heating the alloy until austenite forms, then quenching the hot metal in water or oil, cooling it so rapidly that the transformation to ferrite or pearlite does not have time to take place. The transformation into martensite, by contrast, occurs almost immediately, due to a lower activation energy.

Martensite has a lower density than austenite, so that transformation between them results in a change of volume. In this case, expansion occurs. Internal stresses from this expansion generally take the form of compression on the crystals of martensite and tension on the remaining ferrite, with a fair amount of shear on both constituents. If quenching is done improperly, these internal stresses can cause a part to shatter as it cools; at the very least, they cause internal work hardening and other microscopic imperfections. It is common for quench cracks to form when water quenched, although they may not always be visible.

At this point, if the carbon content is high enough to produce a significant concentration of martensite, the result is an extremely hard but very brittle material. Often, steel undergoes further heat treatment at a lower temperature to destroy some of the martensite (by allowing enough time for cementite etc. to form) and help settle the internal stresses and defects. This softens the steel, producing a more ductile and fracture-resistant metal. Because time is so critical to the end result, this process is known as tempering, which forms tempered steel.

Other materials are often added to the iron/carbon mixture to tailor the resulting properties. Nickel and manganese in steel add to its tensile strength and make austenite more chemically stable, chromium increases hardness and melting temperature, and vanadium also increases hardness while reducing the effects of metal fatigue. Large amounts of chromium and nickel (often 18% and 8%, respectively) are added to stainless steel so that a hard oxide forms on the metal surface to inhibit corrosion. Tungsten interferes with the formation of cementite, allowing martensite to form with slower quench rates, resulting in high speed steel. On the other hand sulfur, nitrogen, and phosphorus make steel more brittle, so these commonly found elements must be removed from the ore during processing.

When iron is smelted from its ore by commercial processes, it contains more carbon than is desirable. To become steel, it must be melted and reprocessed to remove the correct amount of carbon, at which point other elements can be added. Once this liquid is cast into ingots, it usually must be "worked" at high temperature to remove any cracks or poorly mixed regions from the solidification process, and to produce shapes such as plate, sheet, wire, etc. It is then heat-treated to produce a desirable crystal structure, and often "cold worked" to produce the final shape. In modern steel making these processes are often combined, with ore going in one end of the assembly line and finished steel coming out the other. These can be streamlined by a deft control of the interaction between work hardening and tempering.

History of steelmaking

Ancient steel

Steel was known in antiquity, and may have been produced by managing the bloomery so that the bloom contained carbon. Some of the first steel comes from East Africa, dating back to 1400 BC. In the 4th century BC steel weapons like the Falcata were produced in the Iberian peninsula. The Chinese of the Han Dynasty (202 BC – 220 AD) created steel by melting together wrought iron with cast iron, gaining an ultimate product of a carbon-intermediate—steel by the 1st century AD.

Wootz steel and Damascus steel

Wootz steel was produced in India and Sri Lanka from around 300 BC. Along with their original methods of forging steel, the Chinese had also adopted the production methods of creating Wootz steel, an idea imported from India to China by the 5th century AD. This early steel-making method employed the use of a wind furnace, blown by the monsoon winds and produced almost pure steel. Also known as Damascus steel, wootz is famous for its durability and ability to hold an edge. It was originally created from a number of different materials including various trace elements. It was essentially a complicated alloy with iron as its main component. Recent studies have suggested that carbon nanotubes were included in its structure, which might explain some of its legendary qualities, though given the technology available at that time, they were produced by chance rather than by design.

Crucible steel was produced in Merv by 9th to 10th century AD.

In the 11th century, there is evidence of the production of steel in Song China using two techniques: a "berganesque" method that produced inferior, inhomogeneous steel and a precursor to the modern Bessemer process that utilized partial decarbonization via repeated forging under a cold blast.

Early modern steel

Blister steel

Blister steel, produced by the cementation process was first made in Italy in the early 16th century CE and soon after introduced to England. It was produced by Sir Basil Brooke at Coalbrookdale during the 1610s. The raw material for this were bars of wrought iron. During the 17th century it was realised that the best steel came from oregrounds iron from a region of Sweden, north of Stockholm. This was still the usual raw material in the 19th century, almost as long as the process was used.

Crucible steel

Crucible steel is steel that has been melted in a crucible rather than being forged, with the result that it is more homogeneous. Most previous furnaces could not reach high enough temperatures to melt the steel. The early modern crucible steel industry resulted from the invention of Benjamin Huntsman in the 1740s. Blister steel (made as above) was melted in a crucible in a furnace, and cast (usually) into ingots.. This enabled steel to be produced in large quantities cheaply, so that mild steel is now used for most purposes for which wrought iron was formerly used. This was only the first of a number of methods of steel production. The Gilchrist-Thomas process (or basic Bessemer process) was an improvement to the Bessemer process, lining the converter with a basic material to remove phosphorus. Another was the Siemens-Martin process of open hearth steelmaking, which like the Gilchrist-Thomas process complemented, rather than replaced, the original Bessemer process.

Steel industry

Because of the critical role played by steel in infrastructural and overall economic development, the steel industry is often considered to be an indicator of economic progress.

The economic boom in China and India has caused a massive increase in the demand for steel in recent years. Between 2000 and 2005, world steel demand increased by 6%. Since 2000, several Indian and Chinese steel firms have risen to prominence like Tata Steel (which bought Corus Group in 2007), Shanghai Baosteel Group Corporation and Shagang Group. ArcelorMittal is however the world's largest steel producer.

The British Geological Survey reports that in 2005, China was the top producer of steel with about one-third world share followed by Japan, Russia and the USA.

In 2008, steel will be traded as a commodity in the London Metal Exchange.

Recycling

Steel is the most widely recycled material in North America. The steel industry has been actively recycling for more than 150 years, in large part because it is economically advantageous to do so. It is cheaper to recycle steel than to mine iron ore and manipulate it through the production process to form 'new' steel. Steel does not lose any of its inherent physical properties during the recycling process, and has drastically reduced energy and material requirements than refinement from iron ore. The energy saved by recycling reduces the annual energy consumption of the industry by about 75%, which is enough to power eighteen million homes for one year. Recycling one ton of steel saves 1,100 kilograms of iron ore, 630 kilograms of coal, and 55 kilograms of limestone. 76 million tons of steel were recycled in 2005.

In recent years, about three quarters of the steel produced annually has been recycled. However, the numbers are much higher for certain types of products. For example, in both 2004 and 2005, 97.5% of structural steel beams and plates were recycled. Other steel construction elements such as reinforcement bars are recycled at a rate of about 65%. Indeed, structural steel typically contains around 95% recycled steel content, whereas lighter gauge, flat rolled steel contains about 30% reused material.

Because steel beams are manufactured to standardized dimensions, there is often very little waste produced during construction, and any waste that is produced may be recycled. For a typical two-story house, a steel frame is equivalent to about six recycled cars, while a comparable wooden frame house may require as many as 40–50 trees.

Global demand for steel continues to grow, and though there are large amounts of steel existing, much of it is actively in use. As such, recycled steel must be augmented by some first-use metal, derived from raw materials. Commonly recycled steel products include cans, automobiles, appliances, and debris from demolished buildings. A typical appliance is about 65% steel by weight and automobiles are about 66% steel and iron.

While some recycling takes place through the integrated steel mills and the basic oxygen process, most of the recycled steel is melted electrically, either using an electric arc furnace (for production of low-carbon steel) or an induction furnace (for production of some highly-alloyed ferrous products).

Contemporary steel

Modern steels are made with varying combinations of alloy metals to fulfill many purposes. Low alloy steel is alloyed with other elements, usually molybdenum, manganese, chromium, or nickel, in amounts of up to 10% by weight to improve the hardenability of thick sections.

Some more modern steels include tool steels, which are alloyed with large amounts of tungsten and cobalt or other elements to maximize solution hardening. This also allows the use of precipitation hardening and improves the alloy's temperature resistance.

Many other high-strength alloys exist, such as dual-phase steel, which is heat treated to contain both a ferrite and martensic microstructure for extra strength. Transformation Induced Plasticity (TRIP) steel involves special alloying and heat treatments to stabilize amounts of austentite at room temperature in normally austentite-free low-alloy ferritic steels. By applying strain to the metal, the austentite undergoes a phase transition to martensite without the addition of heat. Maraging steel is alloyed with nickel and other elements, but unlike most steel contains almost no carbon at all. This creates a very strong but still malleable metal. Twinning Induced Plasticity (TWIP) steel uses a specific type of strain to increase the effectiveness of work hardening on the alloy. Eglin Steel uses a combination of over a dozen different elements in varying amounts to create a relatively low-cost metal for use in bunker buster weapons. Hadfield steel (after Sir Robert Hadfield) or manganese steel contains 12–14% manganese which when abraded forms an incredibly hard skin which resists wearing. Examples include tank tracks, bulldozer blade edges and cutting blades on the jaws of life. A special class of high-strength alloy, the superalloys, retain their mechanical properties at extreme temperatures while minimizing creep. These are commonly used in applications such as jet engine blades where temperatures can reach levels at which most other alloys would become weak.

Most of the more commonly used steel alloys are categorized into various grades by standards organizations. For example, the American Iron and Steel Institute has a series of grades defining many types of steel ranging from standard carbon steel to HSLA and stainless steel. The American Society for Testing and Materials has a separate set of standards, which define alloys such as A36 steel, the most commonly used structural steel in the United States.

Though not an alloy, galvanized steel is a commonly used variety of steel which has been hot-dipped or electroplated in zinc for protection against corrosion (rust).

Modern production methods

Blast furnaces have been used for two millennia to produce pig iron, a crucial step in the steel production process, from iron ore by combining fuel, charcoal, and air. Modern methods use coke instead of charcoal, which has proven to be a great deal more efficient and is credited with contributing to the British Industrial Revolution. Once the iron is refined, converters are used to create steel from the iron. During the late 19th and early 20th century there were many widely used methods such as the Bessemer process and the Siemens-Martin process. However, basic oxygen steelmaking, in which pure oxygen is fed to the furnace to limit impurities, has generally replaced these older systems. Electric arc furnaces are a common method of reprocessing scrap metal to create new steel. They can also be used for converting pig iron to steel, but they use a great deal of electricity (about 440 kWh per metric ton), and are thus generally only economical when there is a plentiful supply of cheap electricity.

Uses of steel

Iron and steel are used widely in the construction of roads, railways, infrastructure and buildings. Most large modern structures, such as stadiums and skyscrapers, bridges and airports, are supported by a steel skeleton. Even those with a concrete structure will employ steel for reinforcing. In addition to widespread use in major appliances and cars (despite growth in usage of aluminium, it is still the main material for car bodies), steel is used in a variety of other construction-related applications, such as bolts, nails, and screws. Other common applications include shipbuilding, pipeline transport, mining, aerospace, white goods (eg. washing machines), heavy equipment (eg. bulldozers), office furniture, steel wool, tools, and armour in the form of personal vests or vehicle armour (better known as rolled homogeneous armour in this role).

Historically

Before the introduction of the Bessemer process and other modern production techniques, steel was expensive and was only used where no cheaper alternative existed, particularly for the cutting edge of knives, razors, swords, and other items where a hard, sharp edge was needed. It was also used for springs, including those used in clocks and watches.

Long steel

• As supports in reinforced concrete
• Wires
• Railroad tracks
• Structural steel in modern buildings and bridges

Flat carbon steel

• The inside and outside body of automobiles, trains, and ships.
• Major appliances
• Magnetic cores

Stainless steel

• Cutlery
• Rulers
• Wrist watches
• Surgical equipment

See also

• Steel production by country
• Cold rolling
• Foundry
• Free machining
• Global steel industry trends
• Hot rolling
• Iron in mythology
• Maraging steel
• Pelletizing
• Rolling
• Rolling mill
• Rust Belt
• Silicon steel
• Stainless steel
• Steel producers
• Steel mill
• Tinplate

References

Further reading

• Duncan Burn; The Economic History of Steelmaking, 1867-1939: A Study in Competition. Cambridge University Press, 1961 online version
• J. C. Carr and W. Taplin; History of the British Steel Industry Harvard University Press, 1962 online version
• Gernet, Jacques (1982). A History of Chinese Civilization. Cambridge: Cambridge University Press.
• Harukiyu Hasegawa; The Steel Industry in Japan: A Comparison with Britain 1996 online version
• Needham, Joseph (1986). Science and Civilization in China: Volume 4, Part 1 & Part 3. Taipei: Caves Books, Ltd.
• H. Lee Scamehorn; Mill & Mine: The Cf&I in the Twentieth Century University of Nebraska Press, 1992 online version
• Warren, Kenneth, Big Steel: The First Century of the United States Steel Corporation, 1901-2001. (University of Pittsburgh Press, 2001) online review

External links

commons Steel

• Extensive picture gallery of iron and steel production methods in North America and Europe. In German and English.
• International Iron & Steel Institute (IISI)
• steeluniversity.org: Online steel education ressources from IISI and the University of Liverpool

Excalibur, Gibraltar, adamant, anneal, assessable stock, aureate, authorized capital stock, ax, bear up, beef up, bite the bullet, blade, blue chip, blue chip stock, bone, borrowed stock, brace, brace up, brass, brassy, brazen, brick, bronze, bronzy, brutalize, buck up, buttress, calcify, callous, capital stock, case harden, cement, cold steel, common stock, concrete, confirm, convertible preferred stock, copper, coppery, cornify, corporate stock, cumulative preferred stock, cupreous, cuprous, cutlery, cutter, cyclical stock, dagger, defensive stock, deferred stock, diamond, dirk, edge tools, eighth stock, equities, equity, equity security, fancies, ferrous, ferruginous, firm, flint, floating stock, fortify, fossilize, gilt, gird, glamour issue, gold, gold-filled, gold-plated, golden, granite, growth stock, guaranteed stock, harden, heart of oak, high-flier, horse, hot issue, hypothecated stock, inactive stock, income stock, indurate, insulate, inure, invigorate, iron, ironlike, issued capital stock, knife, lapidify, lead, leaden, letter stock, lion, lithify, loaned stock, long stock, marble, mercurial, mercurous, nails, naked steel, nerve, nickel, nickelic, nickeline, nonassessable stock, nonvoting stock, oak, ordinary shares, ossify, ox, pale blue chip, participating preferred stock, penny stock, petrify, pewter, pewtery, pigsticker, point, preference stock, preferred stock, prepare, prop, protect, protective stock, puncturer, quarter stock, quicksilver, rails, rally, ready, refresh, reinforce, reinvigorate, restrengthen, reverse split, rock, seasoned stock, share ledger, shares, sharpener, shore up, short stock, silver, silver-plated, silvery, special situation stock, specialty stock, speculative stock, split, standard stock, steels, steely, stiffen, stiletto, stock, stock ledger, stock list, stock split, stocks, stone, strengthen, support, sustain, sword, temper, ten-share unit stock, tin, tinny, toad sticker, toughen, treasury stock, trusty sword, undergird, unissued capital stock, unmeasurable, utilities, vitrify, voting stock, whittle